The Therminator Stainless Wort Chiller can chill 10 gallons in 5 minutes.

The Therminator is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start. 

All 316 stainless steel plates and fittings.  Chill like the pro's - Identical to commercial brewery chillers.  Brazed together with pure copper in an oxygen free furnace- no potential leaks like a gasketed unit!


Chill 10 gallons in 5 minutes from 212ºF to 68ºF using 58ºF cooling water at 5 gpm.

Ultra compact (7.5" W, 4" D, 3" H)
Super low restriction - ideal for gravity feed
Easy to clean and sanitize - small enough to boil the whole thing!
Garden hose thread connections on water side - no extra adapters to buy.
1/2" male NPT fittings on wort side adapts to most hose connector types. Easier to sanitize than female fittings.
Saves water - lowest water consumption on the market.
Comes with heavy gauge stainless mounting bracket.

Hose and connector kit for flushing your Therminator wort chiller.


Price: $18.99

Quantity:

Get your yeast off to a fast start!  If your wort is too cold, you get long lag times and give bacteria more time to infect your beer. Too hot and off-flavors can form. The ThruMometer allows you to adjust the wort and/or water flow rates in your counterflow heat exchanger to dial in the exact wort temperature your specific yeast culture requires. No more guesswork!

Easy to sanitize Traditional in-line thermometers are made from a complicated assembly of pipe fittings with numerous places for bacteria to hide. The ThruMometer in-line thermometer has NO places for bacteria to hide! The hole interior is mirror-smooth.

Accurate and fast The highly conductive aluminum body and liquid crystal thermometer are VERY fast responding (up to 1 degree F per second), very accurate (1/2 degree F) and allow you to dial in your desired temperature to within 1oF! This is far more useable than any digital or bi-metal thermometer!

Compared to digital and bi-metal thermometers, the ThruMometer NEVER needs calibrating!

Made from heat-treated highly corrosion resistant aluminum, the ThruMometer is built to last a lifetime.

 

Press-fit hose barbs The non-serrated barbs are much easier to clean, don't harbor bacteria, are easy to remove, and don't damage hoses. The press-fit ends are machined to 0.005" precision and finely finished to allow 3/8" ID hose to snugly fit over the barb and hold securely, yet allow easy removal without damaging the hose.

Dialing in the exact water flow limits water usage to only what is required to get the job done. Good for the pocket-book and good for the environment!
ThruMometer operating with Therminator Chiller

Price: $24.99

Quantity: