Kegging Supplies 

HOME   VIEW SHOPPING CART   CHECK OUT

Item #40102
Reconditioned 5 gallon Keg

5 gallon ball-lock only. Good quality used kegs. Each comes with either a pull-ring or lever-action pressure relief in the lid. Insides are cleaned, and the exterior stickers (except warning label) are removed. Not acid washed, caustic washed, or polished. They're holding pressure on original valves, and none have any serious dents.


If you tend to take things too seriously, please call us first to discuss the definition of "serious dent."
Sorry to be snarky, but we've had people freak out about very minor dings or scratches.


Price: $39.99 plus shipping

Quantity:


Email a Friend

Item #40101
Premium Reconditioned 5 Gallon Keg

The best reconditioned kegs you've ever seen
!
 

Each keg lid has pull-ring type pressure relief.
De-dented & acid-washed to remove stains & stickers.

Poppet valves have been replaced.
Disconnect O-rings have been replaced.
Internal dip tube O-rings have been replaced.
Lid o-ring has been replaced.

These are not the same old abandoned junk "as-is" kegs sold elsewhere! Why skimp on a few bucks to buy a nasty old keg that wasn't worth professional refurbishment, then spend hours trying to clean it and round up the spare parts to make it seal? Our kegs look great and work great as soon as you open the box!

Price: $69.99 plus shipping

Quantity:


Email a Friend

 

Item #40100
Brand New 3 Gallon Keg

Beautiful brand new kegs! Available only with ball-lock (Pepsi-style) connectors.  Molded rubber top skirt and handle, full surround rubber foot.

Automatic 130 psi overpressure prevention device in lid.  All stainless steel except for rubber parts.

Price & availability are both volatile.  We will contact you with any important changes before your order is processed or shipped.


Price: $149.99 plus shipping

Quantity:


Email a Friend

 

Item #40104
Brand New 5 Gallon Keg

Beautiful brand new kegs! Available with ball-lock (Pepsi-style) or Pin-lock (Coke-style) connectors. Molded rubber top skirt and handle, full surround rubber foot.

Automatic 130 psi overpressure prevention device. All stainless steel except for rubber parts.

Price & availability are both volatile.  We will contact you with any important changes before your order is processed or shipped.
Price: $164.99 plus shipping

Connector Type
Ball Lock connectors
Pin Lock connectors

Quantity:


Email a Friend

 

Item #40105
Brand New 10 Gallon Keg

Beautiful brand new kegs! Available only with ball-lock (Pepsi-style) connectors.  Molded rubber top skirt and handle, full surround rubber foot.

Automatic 130 psi overpressure prevention device in lid.  All stainless steel except for rubber parts.

Price & availability are both volatile.  We will contact you with any important changes before your order is processed or shipped.
Price: $569.99
plus shipping

Quantity:


Email a Friend

 

Item #40500
CO2 tank, new aluminum 2.5 lb.

New flat bottom tanks won't rust. They stand up without a bracket. New tanks are certified for 10 years.

Beware of cheap used tanks - they may be near date or out of date. You can't fill an out of date tank until you pay (and wait) for recertification.
 



Price: $86.99 plus shipping.  We cannot ship filled tanks.

Quantity:


Email a Friend

 

Item #40501
CO2 tank, new aluminum 5 lb.

New flat bottom tanks won't rust. They stand up without a bracket. New tanks are certified for 10 years.

Beware of cheap used tanks - they may be near date or out of date. You can't fill an out of date tank until you pay (and wait) for recertification.
 



Price: $93.99 plus shipping.  We cannot ship filled tanks.

Quantity:


Email a Friend

 

Item #40502
CO2 tank, new aluminum 10 lb.

New flat bottom tanks won't rust. They stand up without a bracket. New tanks are certified for 10 years.

Beware of cheap used tanks - they may be near date or out of date. You can't fill an out of date tank until you pay (and wait) for recertification.
 



Price: $119.99 plus shipping.  We cannot ship filled tanks.

Quantity:


Email a Friend

 

Item #40400
CO2 Regulator with Single Gauge

CO2 regulator with single gauge. Our most popular regulator. Complete unit with shutoff lever and check valve to prevent damaging pressure backflow. Brand and appearance may vary but not performance.


Price: $49.99 plus shipping

Quantity:


Email a Friend

 

Item #40401
CO2 Regulator with Dual gauges
A dual gauge regulator also shows pressure of the tank. This is not especially useful for CO2 because in the tank, CO2 forms liquid and pressure stays constant until the tank is nearly empty.

For example; at room temperature a full tank shows 720psi, a 1/2-full tank shows 720psi, and a 1/4-full tank shows 720psi! The only real way to know how much CO2 is in the tank is to weigh it.

Each tank's empty weight is stamped into the neck after the letters "TW" (tare weight.) For example; if your 5-pound CO2 tank has a TW of 7.7 pounds, but the tank actually weighs 9.7 pounds, then it has 2 pounds of CO2 in it.  It's 2/5 full.

Liquid CO2 pressure in the tank changes with temperature, but this doesn't effect performance. It's perfectly OK to put the tank & regulator in the refrigerator. The pressure will drop, but that doesn't mean you have less CO2!

Price: $59.99 plus shipping

Quantity:


Email a Friend

 

Item #40203
Keg Disconnect, Ball Lock Gas

Fits Ball Lock (Pepsi-style) kegs. Choose built-in barb connector or male flare nut. Barbs are the easiest for simple applications, flare nut makes it easy to switch connectors because the barb and nut stays on your hose when disconnect is unscrewed.

Price: $7.49 plus shipping

Connector Style:
Barbed
Flare Nut

Quantity:


Email a Friend

 

Item #40204
Keg Disconnect, Ball Lock Liquid Out

Fits Ball Lock (Pepsi-style) kegs. Choose built-in barb connector or male flare nut. Barbs are the easiest for simple applications, flare nut makes it easy to switch connectors because the barb and nut stays on your hose when disconnect is unscrewed.

Price: $7.49 plus shipping

Connector Style:
Barbed
Flare Nut

Quantity:


Email a Friend

 

Item #40200
Keg Disconnect, Pin Lock Gas In

Fits Pin Lock (Coke-style) kegs. Choose built-in barb connector or male flare nut. Barbs are the easiest for simple applications, flare nut makes it easy to switch connectors because the barb and nut stays on your hose when disconnect is unscrewed.

Price: $7.49 plus shipping

Connector Style:
Barbed
Flare Nut

Quantity:


Email a Friend

 

Item #40201
Keg Disconnect, Pin Lock Liquid Out

Fits Pin Lock (Coke-style) kegs. Choose built-in barb connector or male flare nut. Barbs are the easiest for simple applications, flare nut makes it easy to switch connectors because the barb and nut stays on your hose when disconnect is unscrewed.

Price: $7.49 plus shipping

Connector Style:
Barbed
Flare Nut

Quantity:


Email a Friend

 

Item #40210
Barb and Nut set for Flare Nut Disconnects

This is what you need for connecting beer or CO2 hose to male flare nut style disconnects. Works with 1/4 or 3/16 inch inner diameter hose.


Price: $1.99 (large size costs more)

Barb Size:
Small for 3/16" or 1/4"
Large for 5/16" (add $2.00)

Quantity:


Email a Friend

 

Item #40202
Pin Lock Keg Connector O Ring

Highest grade replacement o-rings. These are the external O-Rings on the keg connectors.


Price: $0.49 each, plus shipping

Quantity:


Email a Friend

 

Item #40205
Ball Lock Keg Connector O Ring

Highest grade replacement o-rings. These are the external O-Rings on the keg connectors.


Price: $0.49 each, plus shipping

Quantity:


Email a Friend

 

Item #40206
Keg Lid O Ring

It's especially important to replace this O-Ring if it smells like soda or root beer.


Price: $1.79 each, plus shipping

Quantity:


Email a Friend

 

Item #40207
Keg Dip Tube O Ring

Works for gas-side and liquid-side dip tubes.


Price: $0.39 each, plus shipping

Quantity:


Email a Friend

 

Item #40303
Poppett Valve
Replacement valve for inside the keg connectors. The color of yours may be different, so look closely to choose the one that matches in shape. Solves sticky, leaking, or spraying connectors. Clean out the cavity before putting in the new poppett.

Price: $2.99 each plus shipping

Poppett Style:
Style 1
Style 2
Style 3
Style 4

Quantity:


Email a Friend

 

Item #40406
Regulator Gauge, Low Range 0 to 30 psi

Replacement for single or dual gauge regulators. This is a nice gauge because the 0-30 psi scale makes it easy to set precisely compared to other 0-60 psi gauges. Normal draft beer operation is 8-14 psi, depending on carbonation level.

Price: $11.99 plus shipping

Quantity:


Email a Friend

 

Item #40407
Regulator Gauge, Low Range 0 to 60 psi

For all single or dual gauge CO2 regulators. Wider range than 0-30 psi model is good for higher pressure applications, such as high-pressure CO2 injection and Champagne.

Price: $11.99 plus shipping

Quantity:


Email a Friend

 

Item #40411
Regulator Gauge, 0 to 2000 psi LH Thread

Replacement for dual gauge regulators, or upgrade single gauge to dual! Left Handed threads. Look at the back of your regulator for a LH or RH stamp. Almost all regulators use LH threads for the high-pressure ports.

Price: $13.99 plus shipping

Quantity:


Email a Friend

 

Item #40412
Regulator Gauge, 0 to 2000 psi RH thread

Replacement for dual gauge regulators, or upgrade single gauge to dual! Left Handed threads. Look at the back of your regulator for a LH or RH stamp. Almost all regulators use LH threads for the high-pressure ports, RH is rare.

Price: $13.99 plus shipping

Quantity:


Email a Friend

 

Item #40410
Regulator Body Plug

Plug the hole caused by removing one or both gauges. Choose from Left Hand or Right Hand threads. Look for LH or RH stamped on the regulator. Usually, the high pressure ports on the left & right of the regulator are LH threads.

Price: $1.99 plus shipping

Thread Style:
Right Hand Threads
Left Hand Threads

Quantity:


Email a Friend

 

Item #40208
Picnic Tap for draft beer

Popular squeeze-type thumb operated tap. Also known as the "Cobra" tap. Attaches to 3/16 or 1/4" inner diameter beer line.

Price: $3.99 plus shipping

Quantity:


Email a Friend

 

Item #31100
Tube, 3/16" ID Superflex Restrictor Hose (choke)

This is the best hose for almost all short-run beverage lines. The total restriction in your beer line must equal the amount of pressure applied to the keg, or else the beer will flow too fast. Never turn down the pressure to dispense! This hose restricts more than 1 P.S.I. per foot. Figure that your keg & faucet already restrict about 1-2 P.S.I. So for example, a keg at 12 PSI needs about 6 or 8 feet of this hose (used as beer line) for proper low-foam dispensing.
Price: $0.69 per foot plus shipping

Quantity:


Email a Friend

 

Item #31105
Tube, 1/4" ID Superflex Beverage or CO2 Hose

Thick wall 1/4" vinyl hose. Great for CO2 applications, where restriction isn't necessary. This hose can also be used on longer beverage runs. Never turn down the pressure to dispense! This hose restricts about 0.5 P.S.I. per foot. Figure that your keg & faucet already restrict about 1-2 P.S.I. So for example, a keg at 12 PSI needs about 20 feet of this hose (used as beer line) for proper low-foam dispensing.
Price: $0.69 per foot plus shipping

Quantity:


Email a Friend

 

Item #31111
Tube, 5/16" ID Superflex COLORED CO2 Hose

Extra thick wall 5/16" vinyl hose. Usually Red or Blue color. The best tube for CO2 applications, where restriction isn't necessary. Most CO2 regulators already have a 5/16" hose barb.
Price: $0.85 per foot plus shipping

Quantity:


Email a Friend

 

Item #41700
Stainless Steel Hose Clamp

Good for hose up to 1/2 inch outer diameter. These are the same clamps we use for our wort chillers, they will fit the 3/8 ID reinforced hose.

Price: $0.95 plus shipping

Quantity:


Email a Friend

 

Item #41200
Air Distributor for CO2 or Nitrogen

This is the best way to split the output from your regulator to drive multiple kegs. Input and outputs are barbs for standard 5/16" ID tube. Each output has an independent shutoff lever and internal antibackflow check valve.


Choose the number of outputs:
2-way distributor $29.99 plus shipping
3-way distributor $39.99 plus shipping
4-way distributor $49.99 plus shipping

Quantity:


Email a Friend

 

Item #40404
Regulator Aircock with Check Valve

Replacement or upgrade from non-check valve operation. Check valve prevents backflow when connecting to a keg at higher pressure than regulator setting.

Price: $11.99 plus shipping

Air Connection Style:
1/4" Barb
5/16" Barb (standard)
Male Flare Nut

Quantity:


Email a Friend

 

Item #40409
Regulator Output Y Splitter

Solid brass. Split the output of any CO2 regulator. Unscrew the current CO2 fitting (usually an aircock) from bottom of regulator body, then screw in the Y splitter. You'll also need to order a second aircock.


Price: $8.99 plus shipping

Quantity:


Email a Friend

 

  
Home | Search | Current Order | Wish List