Wort Chillers

HOME   VIEW SHOPPING CART   CHECK OUT   SEARCH

Read Before Ordering: Information on shipping costs CLICK HERE

Item #35325
Wort Chiller, 25 foot
Immersion chiller cools up to 5 gal. boil in 10-15 minutes. With heavy refrigeration-grade copper tube, and high-strength vinyl hose to stand up to the hot water which runs through it.

As you run cold water through the coil, it absorbs & removes heat without diluting the wort. Immersion chillers are clean and sanitary. Just put it in the pot 15 minutes before end of boil. Heat from the boil sanitizes the chiller. When boiling is complete, turn on the cold water to begin rapid chilling.

The rate of chilling depends on the temperature & flow rate of your cold water, how much wort you're cooling, and how cool you're trying to make it. Because the temperature difference between the hot wort and the cooling water is greatest when you begin chilling, the cooldown from 212 down to about 100 degrees is very rapid. This is perfect, because you want to get the wort below about 140 degrees very quickly. You'll notice a slowdown in the rate of chilling as you approach your target of 70 to 80 degrees.

Price: $69.99

Quantity:


Email a Friend

 

Item #32200
Faucet Adapter
Adapts kitchen faucets to garden hose type threads. Just unscrew the aerator ring and screw on the adapter. All-Metal threads make this much more durable than those with plastic threads.

Not for non-standard kitchen faucets, such as filter faucets or sprayers.  This will fit standard kitchen faucets with male or female threads. 


Price: $2.99 plus shipping

Quantity:


Email a Friend

 

Item #35333
Chiller Fitting - 3/8 barb to Garden Hose

This fitting allows you to connect a garden hose or similar fitting (as on a utility sink or on our faucet adapter) to 3/8 inner diameter hose. Ideal for use with wort chillers when combined with 3/8 ID reinforced vinyl hose.


Price: $3.99 plus shipping

Quantity:


Email a Friend

 

Item #41700
Stainless Steel Hose Clamp

Good for hose up to 1/2 inch outer diameter. These are the same clamps we use for our wort chillers, they will fit the 3/8 ID reinforced hose.

Price: $0.95 plus shipping

Quantity:


Email a Friend

 

  
Home | Search | View Current Order | Wish List