HOME VIEW SHOPPING CART CHECK OUT SEARCH
Read Before Ordering: Information on shipping costs CLICK HERE
Powerful acid cleaner for kegs, lines, shanks, and faucets. Removes odors and other contamination from problem systems. Dissolves oxalate scale.
For best results, follow up with LLC Liquid Line Cleaner and Sani-Clean. Price: $14.99 Quantity:
Concentrated caustic cleaner for kegs, lines, shanks, and faucets. Low foaming, rapid soil penetration, emulsifies fat, grease, and oils. Reduces or eliminates beer stone!
For best results, use after Acid Cleaner and follow with Sani-Clean. Price: $17.99 Quantity:
Excellent no-rinse sanitizer which meets all the needs for home brewing and draft beer systems. Sanitizes as well as Star San, but without the foaming.
Add to water; 1 ounce makes 3 gallons of working solution. Price: $19.99 Quantity:
Complete system for cleaning faucet and beer lines.
Includes a large bottle of cleaning solution sufficient for many uses.
Includes bottle with metal pump, hose with connector, faucet wrench and faucet brush.
Instructions included. Price: $59.99 Quantity:
Item #41303 Keg Lube
Sanitary white USP mineral oil. Absolutely tasteless and odorless, will not taint when in contact with food products. Impervious to water.
For use on valves, o-rings, sanitary pumps, moving freezer and chiller parts.
This big 4 ounce tube is a lifetime supply for most users! Price: $9.99 Quantity:
This is the best hose for almost all short-run beverage lines. The total restriction in your beer line must equal the amount of pressure applied to the keg, or else the beer will flow too fast. Never turn down the pressure to dispense!
This hose restricts a bit more than 1 P.S.I. per foot. Figure that your keg & faucet already restrict about 1-2 P.S.I. So for example, a keg at 12 P.S.I. needs about 8 or 9 feet of this hose (used as beer line) for proper low-foam dispensing. Price: $0.69 per footQuantity:
Thick wall 1/4" vinyl hose. Great for CO2 applications, where restriction isn't necessary.
This hose can also be used on longer beverage runs. Never turn down the pressure to dispense! This hose restricts about 0.5 P.S.I. per foot. Figure that your keg & faucet already restrict about 1-2 P.S.I. So for example, a keg at 12 P.S.I. needs about 20 feet of this hose (used as beer line) for proper low-foam dispensing. Price: $0.69 per footQuantity:
Extra thick wall 5/16" vinyl hose. Red or Blue color. The best tube for CO2 applications, where restriction isn't necessary. Most CO2 regulators already have a 5/16" hose barb. Price: $0.85 per footQuantity:
Good for hose up to 1/2 inch outer diameter. These are the same clamps we use for our draft beer systems and wort chillers. Price: $0.95Quantity:
Item #41300 Tailpiece with Neo Washer Tailpieces have a barb for attaching beverage tube. Using a BEER NUT, a tailpiece connects tubing to tavern heads, shanks, and other beer devices such as splitters, shutoffs, and foam preventers.
Generally, each beverage hose needs 2 tailpieces. Price: $1.49 Hose Barb Size:For 3/16 Inner Diameter HoseFor 1/4 Inner Diameter HoseFor 5/16 Inner Diameter HoseFor 3/8 Inner Diameter HoseQuantity:
Item #41305 Tailpiece with MFL connector
Great for creating quick connections!
If you already have MFL connectors for your soda kegs, you can put these tailpieces on commercial keg taps - then switch hoses in a jiffy!
Many do-it-yourself uses for these stainless (not plated brass!) tailpieces. Price: $9.99 each Quantity:
Item #41304 Elbow Tailpiece with Neo Washer
Tailpiece with built-in 90-degree elbow. Good for tight spaces or preventing kinks. Price: $7.99 Hose Barb Size:For 3/6 Inner Diameter HoseFor 1/4 Inner Diameter HoseQuantity:
Item #41301 Beer Nut
This is used to secure a tailpiece onto a tavern head, shank, or other device. You'll need a beer nut for each tailpiece. One size fits all. Price: $1.49Quantity:
